How to Get Economic Benefit of Lime Rotary Kiln?

View previous topic View next topic Go down

How to Get Economic Benefit of Lime Rotary Kiln?

Post  ploor on Fri Sep 19, 2014 7:24 pm

With the advent of low-carbon economy, China’machinery industry is facing new“green”tests,and the development of the rotary kiln is no exception. It must be efficient, energy saving, emission reduction. Otherwise, it will be eliminated by the market. In recent years, many well-known companies are keeping up with the times, technological innovation, and strive to make certain achievements on the basis of the energy-saving and emission-reduction. Rotary kilns are used to heat solids to the point where a required chemical reaction(s) takes place. The rotary kiln is basically a rotating inclined cylinder. Rotary kiln can be divided into lime kiln or lime rotary kiln, clinker rotary kiln, cement rotary kiln, etc.

Lime rotary kiln, also called lim pit, is used for baking active lime and dolomite in the steel factory and ferroalloy factory.In industrial innovation, lime rotary kiln must have high yield and low consumption in order to make good economic benefit, so how to do it ?

1. the temperature of rotary kiln is determined by both coal and wind. The charging temperature should be controlled at 800-900 degrees Celsius in the preheating section, and at 950-1150 degrees Celsius in the reaction period. The discharging temperature should be controlled at 900 degrees Celsius, and the exhaust gas should be controlled at 800-950 degrees Celsius.




2. it must ensure that the material is normally calcined and then correspondingly increase the yield. In this period, the temperature should be elaborately controlled which is not only beneficial for stabilizing the quality of the products but also balance the bonding speed and wear rate of the material on the surface of refractory in the cellar, thus maintain the thickness of the surface of the refractory and effectively extend life cycle of the rotary kiln.

3. Hongxing Machinery installed 10 thermocouple with protection tube in rotary kiln which is capable of continuously measuring the temperature of solid phase and gas phase and transfer it to control room with wireless transmission, displaying on computer and record the trend of temperature.

Welcome to visit Hongxing Macihnery: sales@hxjq.com.

rotating drying kiln: http://www.ball-mill-china.com/products/rotary_kiln.html

ploor
Groovy Cat
Groovy Cat

Posts : 50
Join date : 2014-05-23

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum